Morocca

Chain size

3/8" LP · .050" · 62 DL chain: which saws it fits

A 3/8" Low Profile pitch, .050" gauge chain with 62 drive links. It is most often found on 18" bars, and fits 359 chainsaw and pole-saw models from 11 brands in Oregon's fitment data. Bar length alone doesn't decide fit — all three numbers have to match your saw.

Pitch3/8" Low Profile
Gauge.050"
Drive links62
Typical bar18"

Oregon chains in this size: 91PX062G, 91VXL062G, 91VXL062X2

Popular saws that take this chain

DeWalt DCCS672B18" barECHO CS-31018" barECHO CS-355T18" barECHO CS-40018" barEGO CS180018" barEGO CS180418" bar

MOROCCA chains in this size

18-in Chainsaw Chain
Saw Chains
18-in Chainsaw Chain
$22
2PC Replacement Saw Chain
Saw Chains
2PC Replacement Saw Chain
$25

Confirm it's your size

  1. Read the bar stamp. Near the tail of the guide bar you'll usually find pitch, gauge and drive links, e.g. 3/8 LP .050 62. Some bars stamp the Oregon bar number instead — look it up on oregonproducts.com.
  2. Count the drive links on your old chain — the teeth that ride inside the bar groove, not the cutters. It must be exactly 62.
  3. Low profile is not full profile. 3/8" LP and 3/8" full-profile chains share the "3/8" but are not interchangeable.
  4. If the stamp is worn off, the owner's manual lists the bar and chain; find it on the manufacturer's support site.

Easy to mix up with

All 359 models, by brand

Craftsman 153 models
Poulan 97 models
ECHO 38 models
Makita 37 models
Husqvarna 20 models
Ryobi 6 models
EGO 3 models
Kobalt 2 models
Atlas 1 models
Black+Decker 1 models
DeWalt 1 models

Source: Oregon part-finder fitment data, retrieved 2026-07-06. We list a model here when Oregon recommends a 3/8" LP · .050" · 62 DL chain for one of its bar lengths; we haven't fitted each saw ourselves. Some bar configurations in the source don't give a drive-link count and aren't included — if your saw isn't listed, count your chain.