§ Fitment Guide
Makita UC3051A chain size & replacement chart
The Makita UC3051A takes a 3/8" Low Profile™ pitch, .050" gauge chain. Below: every factory bar length with its exact drive-link count, cross-referenced to Oregon part numbers, plus the OEM parts list.
Fitment matrix
| Bar length | Pitch | Gauge | Drive links | Oregon chains | Bars / combos |
|---|---|---|---|---|---|
| 10" | 3/8" Low Profile™ | .050" | — | — | 100SXEA041100SDEA041 |
| 12" | 3/8" Low Profile™ | .043" / .050" | 45 | 91PX045G91VXL045X291VXL045GS45 | 124MLEA041120SXEA041120DGEA041120SDEA04110569827792 |
| 14" | 3/8" Low Profile or 3/8" Low Profile™ | .043" / .050" | 52 | 90PX052G91PX052G91VXL052X291VXL052GS52X3S52S52T | 144MLEA041140SXEA041140SDEA041140DGEA041140SDET0411056992785627856PDQ |
| 16" | 3/8" Low Profile or 3/8" Low Profile™ | .043" / .050" | 56 | 90PX056GS56X391PX056G91VXL056X291VXL056GS56-21S56S56T | 164MLEA041160SXEA041160SPEA041160SDEA041160DGEA041160SDET041623000623000PDQ10570027857PDQ27857 |
| 18" | 3/8" Low Profile™ | .050" | 62 | 91PX062G91VXL062X291VXL062G | 180SDEA041180SDET041180DGEA041540394 |
Source: Oregon part-finder, retrieved 2026-07-06. Part numbers link to the manufacturer's spec page. Always confirm drive-link count against your current chain before ordering.
How to confirm the fit
- Read your bar. The pitch and gauge are stamped on the guide bar near the saw body — e.g.
3/8" LP .050". - Count drive links. Lay the old chain flat and count the teeth that ride inside the bar groove. This number must match exactly; length in inches is not enough.
- Match all three. Pitch, gauge and drive-link count all have to agree with a row in the table above. Two of three is not a fit.
Watch: how to identify chain pitch and gauge
Oregon Products: Identifying Chain Pitch and Chain Gauge Official video from Oregon Products, the manufacturer behind the cross-reference part numbers above.
Official Makita resources
- Makita manuals & parts breakdowns — owner's manual for the UC3051A, including tensioning and maintenance intervals.
- Makita parts breakdowns — exploded parts diagrams and OEM part numbers.
FAQ
What size chain does a Makita UC3051A take?
The Makita UC3051A runs a 3/8" Low Profile™ pitch, .050" gauge chain. Available bar lengths: 10", 12", 14", 16", 18". Match the drive-link count to your bar (see the table above).
How do I know which gauge my UC3051A chain is?
Check the number stamped on your guide bar near the tail, or measure the drive-link thickness with calipers. Common gauges for the UC3051A are .050", .043" / .050".
Can I put a longer bar on my Makita UC3051A?
Oregon lists 10", 12", 14", 16", 18" bars for the UC3051A. Stay within this range — a longer bar than the engine is rated for cuts slowly and accelerates wear.