§ Fitment Guide
Husqvarna 235E chain size & replacement chart
The Husqvarna 235E takes a 3/8" Low Profile™ pitch, .043" / .050" gauge chain. Below: every factory bar length with its exact drive-link count, cross-referenced to Oregon part numbers, plus the OEM parts list.
Fitment matrix
| Bar length | Pitch | Gauge | Drive links | Oregon chains | Bars / combos |
|---|---|---|---|---|---|
| 12" | 3/8" Low Profile™ | .043" / .050" | 45 | 90PX045G91PX045G91VXL045X291VXL045GS45 | 124MLEA041120SXEA041120DGEA041120SDEA04110569827792 |
| 13" | .325" | .050" | — | — | — |
| 14" | 3/8" Low Profile or 3/8" Low Profile™ | .043" / .050" | 52 | 90PX052G91PX052G91VXL052X291VXL052GPS52S52X3S52S52T | 144MLEA041140SXEA041140SDEA041140DGEA041140SDET0411056992785627856PDQ541652 |
| 15" | .325" | .050" | — | — | — |
| 16" | 3/8" Low Profile or 3/8" Low Profile™ or .325" | .043" / .050" / .058" | 56, 66 | 90PX056GS56X391PX056G91VXL056X291VXL056GPS56S56-21S56S56TM66J66 | 164MLEA041160SXEA041160SPEA041160SDEA041160DGEA041160SDET041623000623000PDQ10570027857PDQ27857541656578482579778 |
| 18" | 3/8" Low Profile or 3/8" Low Profile™ or .325" or 325" | .050" / .058" | 62, 72 | 91PX062G91VXL062X291VXL062GPS62S62X3S62S62TT62X3T62M72X3M72J72 | 180SDEA041180SDET041180DGEA0415403943927239272PDQ541662578764579809 |
Source: Oregon part-finder, retrieved 2026-07-06. Part numbers link to the manufacturer's spec page. Always confirm drive-link count against your current chain before ordering.
Compatible chains in our shop
How to confirm the fit
- Read your bar. The pitch and gauge are stamped on the guide bar near the saw body — e.g.
3/8" LP .050". - Count drive links. Lay the old chain flat and count the teeth that ride inside the bar groove. This number must match exactly; length in inches is not enough.
- Match all three. Pitch, gauge and drive-link count all have to agree with a row in the table above. Two of three is not a fit.
Watch: how to identify chain pitch and gauge
Oregon Products: Identifying Chain Pitch and Chain Gauge Official video from Oregon Products, the manufacturer behind the cross-reference part numbers above.
Official Husqvarna resources
- Husqvarna manuals & downloads — owner's manual for the 235E, including tensioning and maintenance intervals.
- Husqvarna parts diagrams (IPL) — exploded parts diagrams and OEM part numbers.
FAQ
What size chain does a Husqvarna 235E take?
The Husqvarna 235E runs a 3/8" Low Profile™ pitch, .043" / .050" gauge chain. Available bar lengths: 12", 13", 14", 15", 16", 18". Match the drive-link count to your bar (see the table above).
How do I know which gauge my 235E chain is?
Check the number stamped on your guide bar near the tail, or measure the drive-link thickness with calipers. Common gauges for the 235E are .043" / .050", .050", .043" / .050" / .058", .050" / .058".
Can I put a longer bar on my Husqvarna 235E?
Oregon lists 12", 13", 14", 15", 16", 18" bars for the 235E. Stay within this range — a longer bar than the engine is rated for cuts slowly and accelerates wear.