§ Fitment Guide
Husqvarna 120 MARK II chain size & replacement chart
The Husqvarna 120 MARK II takes a 3/8" Low Profile™ pitch, .050" gauge chain. Below: every factory bar length with its exact drive-link count, cross-referenced to Oregon part numbers, plus the OEM parts list.
Fitment matrix
| Bar length | Pitch | Gauge | Drive links | Oregon chains | Bars / combos |
|---|---|---|---|---|---|
| 10" | 3/8" Low Profile™ | .050" | — | — | — |
| 12" | 3/8" Low Profile™ | .050" | — | — | 120SXEA095120SDEA095 |
| 13" | .325" | .050" | — | — | — |
| 14" | 3/8" Low Profile™ | .050" | 52 | 91PX052G91VXL052X291VXL052GS52X3S52S52TT52X3T52 | 140SXEA095140SDEA095 |
| 15" | .325" | .050" | — | — | — |
| 16" | 3/8" Low Profile™ | .050" | 56 | S56X391PX056G91VXL056X291VXL056GS56-21S56S56TT56X3T56 | 160SXEA095160SDEA095 |
| 18" | 3/8" Low Profile™ | .050" | 62 | 91PX062G91VXL062X291VXL062GS62X3S62S62TT62X3T62 | 180SDEA095 |
Source: Oregon part-finder, retrieved 2026-07-06. Part numbers link to the manufacturer's spec page. Always confirm drive-link count against your current chain before ordering.
Compatible chains in our shop
How to confirm the fit
- Read your bar. The pitch and gauge are stamped on the guide bar near the saw body — e.g.
3/8" LP .050". - Count drive links. Lay the old chain flat and count the teeth that ride inside the bar groove. This number must match exactly; length in inches is not enough.
- Match all three. Pitch, gauge and drive-link count all have to agree with a row in the table above. Two of three is not a fit.
Watch: how to identify chain pitch and gauge
Oregon Products: Identifying Chain Pitch and Chain Gauge Official video from Oregon Products, the manufacturer behind the cross-reference part numbers above.
Official Husqvarna resources
- Husqvarna manuals & downloads — owner's manual for the 120 MARK II, including tensioning and maintenance intervals.
- Husqvarna parts diagrams (IPL) — exploded parts diagrams and OEM part numbers.
FAQ
What size chain does a Husqvarna 120 MARK II take?
The Husqvarna 120 MARK II runs a 3/8" Low Profile™ pitch, .050" gauge chain. Available bar lengths: 10", 12", 13", 14", 15", 16", 18". Match the drive-link count to your bar (see the table above).
How do I know which gauge my 120 MARK II chain is?
Check the number stamped on your guide bar near the tail, or measure the drive-link thickness with calipers. Common gauges for the 120 MARK II are .050".
Can I put a longer bar on my Husqvarna 120 MARK II?
Oregon lists 10", 12", 13", 14", 15", 16", 18" bars for the 120 MARK II. Stay within this range — a longer bar than the engine is rated for cuts slowly and accelerates wear.