§ Fitment Guide
Poulan Electric Models chain size & replacement chart
The Poulan Electric Models takes a 3/8" Low Profile™ pitch, .043" / .050" gauge chain. Below: every factory bar length with its exact drive-link count, cross-referenced to Oregon part numbers, plus the OEM parts list.
Fitment matrix
| Bar length | Pitch | Gauge | Drive links | Oregon chains | Bars / combos |
|---|---|---|---|---|---|
| 10" | 3/8" Low Profile™ | .043" / .050" | 40 | 90PX040G91PX040G | 100SDEA041 |
| 12" | 3/8" Low Profile™ | .043" / .050" | 45 | 91PX045G91VXL045X291VXL045G | 124MLEA041120SXEA041120DGEA041120SDEA041105698 |
| 14" | 3/8" Low Profile™ | .043" / .050" | 52 | 90PX052G91PX052G91VXL052X291VXL052GPS52 | 144MLEA041140SXEA041140SDEA041140DGEA041140SDET041105699541652 |
| 16" | 3/8" Low Profile™ | .043" / .050" | 56 | 90PX056G91PX056G91VXL056X291VXL056GPS56 | 164MLEA041160SXEA041160SPEA041160SDEA041160DGEA041160SDET041105700541656 |
| 18" | 3/8" Low Profile™ | .050" | 62 | 91PX062G91VXL062X291VXL062GPS62 | 180SDEA041180SDET041180DGEA041540394541662 |
Source: Oregon part-finder, retrieved 2026-07-06. Part numbers link to the manufacturer's spec page. Always confirm drive-link count against your current chain before ordering.
How to confirm the fit
- Read your bar. The pitch and gauge are stamped on the guide bar near the saw body — e.g.
3/8" LP .050". - Count drive links. Lay the old chain flat and count the teeth that ride inside the bar groove. This number must match exactly; length in inches is not enough.
- Match all three. Pitch, gauge and drive-link count all have to agree with a row in the table above. Two of three is not a fit.
Watch: how to identify chain pitch and gauge
Oregon Products: Identifying Chain Pitch and Chain Gauge Official video from Oregon Products, the manufacturer behind the cross-reference part numbers above.
Official Poulan resources
- Poulan Pro manuals & IPL — owner's manual for the Electric Models, including tensioning and maintenance intervals.
FAQ
What size chain does a Poulan Electric Models take?
The Poulan Electric Models runs a 3/8" Low Profile™ pitch, .043" / .050" gauge chain. Available bar lengths: 10", 12", 14", 16", 18". Match the drive-link count to your bar (see the table above).
How do I know which gauge my Electric Models chain is?
Check the number stamped on your guide bar near the tail, or measure the drive-link thickness with calipers. Common gauges for the Electric Models are .043" / .050", .050".
Can I put a longer bar on my Poulan Electric Models?
Oregon lists 10", 12", 14", 16", 18" bars for the Electric Models. Stay within this range — a longer bar than the engine is rated for cuts slowly and accelerates wear.