§ Fitment Guide
Echo CS-490 chain size & replacement chart
The Echo CS-490 takes a .325" pitch, .058" gauge chain. Below: every factory bar length with its exact drive-link count, cross-referenced to Oregon part numbers, plus the OEM parts list.
Fitment matrix
| Bar length | Pitch | Gauge | Drive links | Oregon chains | Bars / combos |
|---|---|---|---|---|---|
| 15" | .325" | .058" | 64 | 21LPX064G21LPX064X2 | — |
| 16" | .325" | .050" / .058" | 66 | 20BPX066G20LGX066G20LPX066X220LPX066G95TXL066GH66M6621LGX066G21LPX066X221LPX066GJ66 | 160VXLGK216 |
| 18" | .325" or 3/8" | .050" / .058" | 72 | 20BPX072G20LGX072G20LPX072X220LPX072G95TXL072GH72M72X3M7221BPX072G21LGX072G21LPX072G21LPX072X2J7272TXL064G72EXL064G72LPX064G | 180VXLGK216 |
| 20" | .325" or 3/8" | .050" / .058" | 78 | J78-2120BPX078G20LGX078G20LPX078X220LPX078GH78TH78-21H7821LGX078G21LPX078GJ7872TXL070G72EXL070G72LPX070G | 200VXLGK216 |
Source: Oregon part-finder, retrieved 2026-07-06. Part numbers link to the manufacturer's spec page. Always confirm drive-link count against your current chain before ordering.
Compatible chains in our shop
How to confirm the fit
- Read your bar. The pitch and gauge are stamped on the guide bar near the saw body — e.g.
3/8" LP .050". - Count drive links. Lay the old chain flat and count the teeth that ride inside the bar groove. This number must match exactly; length in inches is not enough.
- Match all three. Pitch, gauge and drive-link count all have to agree with a row in the table above. Two of three is not a fit.
Watch: how to identify chain pitch and gauge
Oregon Products: Identifying Chain Pitch and Chain Gauge Official video from Oregon Products, the manufacturer behind the cross-reference part numbers above.
Official Echo resources
- ECHO product manuals — owner's manual for the CS-490, including tensioning and maintenance intervals.
- ECHO parts catalog lookup — exploded parts diagrams and OEM part numbers.
FAQ
What size chain does a Echo CS-490 take?
The Echo CS-490 runs a .325" pitch, .058" gauge chain. Available bar lengths: 15", 16", 18", 20". Match the drive-link count to your bar (see the table above).
How do I know which gauge my CS-490 chain is?
Check the number stamped on your guide bar near the tail, or measure the drive-link thickness with calipers. Common gauges for the CS-490 are .058", .050" / .058".
Can I put a longer bar on my Echo CS-490?
Oregon lists 15", 16", 18", 20" bars for the CS-490. Stay within this range — a longer bar than the engine is rated for cuts slowly and accelerates wear.