Chain size
.325" · .058" · 72 DL chain: which saws it fits
A .325" pitch, .058" gauge chain with 72 drive links. It is most often found on 18" bars, and fits 107 chainsaw and pole-saw models from 5 brands in Oregon's fitment data. Bar length alone doesn't decide fit — all three numbers have to match your saw.
Pitch.325"
Gauge.058"
Drive links72
Typical bar18"
Oregon chains in this size: 21BPX072G, 21LGX072G, 21LPX072G, 21LPX072X2
Popular saws that take this chain
Confirm it's your size
- Read the bar stamp. Near the tail of the guide bar you'll usually find pitch, gauge and drive links, e.g.
.325 .058 72. Some bars stamp the Oregon bar number instead — look it up on oregonproducts.com. - Count the drive links on your old chain — the teeth that ride inside the bar groove, not the cutters. It must be exactly 72.
- If the stamp is worn off, the owner's manual lists the bar and chain; find it on the manufacturer's support site.
Easy to mix up with
- .325" · .058" · 66 DL — same pitch and gauge, shorter loop (usually 16" bars)
- .325" · .058" · 78 DL — same pitch and gauge, longer loop (usually 20" bars)
- .325" · .050" · 72 DL — same pitch and length, thinner drive links; it won't sit right in a .058" groove
All 107 models, by brand
Husqvarna 82 models
- 440 18"
- 445 18"
- 450 18"
- 460 RANCHER 18"
- 33 18"
- 38 18"
- 40 18"
- 42 18"
- 44 18"
- 45 18"
- 49 18"
- 50 18"
- 51 18"
- 55 18"
- 55 RANCHER 18"
- 57 18"
- 133 18"
- 140 18"
- 140S 18"
- 154 18"
- 234 18"
- 238 18"
- 240 18"
- 242 18"
- 242XP 18"
- 246 18"
- 254 18"
- 254XP 18"
- 257 18"
- 261 18"
- 262 18"
- 262XP 18"
- 336 18"
- 338XPT 18"
- 339XP 18"
- 340 18"
- 340E 18"
- 340SE 18"
- 340SG 18"
- 345 18"
- 346 18"
- 346XP 18"
- 346XP E-TECH 18"
- 346XPG 18"
- 350 18"
- 351 18"
- 353 18"
- 353E-TECH 18"
- 353G E-TECH 18"
- 355 18"
- 357 18"
- 357XP 18"
- 357XPG 18"
- 359 18"
- 359E-TECH 18"
- 360 18"
- 362 18"
- 362 XP 18"
- 435 18"
- 435e 18"
- 440e 18"
- 444 18"
- 445e 18"
- 450 50th Anniversary 18"
- 450e 18"
- 455 18"
- 455 RANCHER 18"
- 455e RANCHER 18"
- 460 18"
- 466 18"
- 543XP 18"
- 543XPG 18"
- 545 18"
- 545 MARK II 18"
- 550XP 18"
- 550XP MARK II 18"
- 550XPG 18"
- 555 18"
- 560XP 18"
- 560XPG 18"
- 1400 18"
- 1600 18"
Makita 15 models
- DCS430 18"
- DCS431 18"
- DCS510 18"
- DCS520I 18"
- DCS540 18"
- DCS5121 18"
- DCS5200i 18"
- DCS6000i 18"
- DCS46018 18"
- EA5000P53G 18"
- EA5600F 18"
- EA6100P53E 18"
- EA6100P53G 18"
- EA6100PREG 18"
- EA6101P53G 18"
Poulan 1 models
- 325 18"
Source: Oregon part-finder fitment data, retrieved 2026-07-06. We list a model here when Oregon recommends a .325" · .058" · 72 DL chain for one of its bar lengths; we haven't fitted each saw ourselves. Some bar configurations in the source don't give a drive-link count and aren't included — if your saw isn't listed, count your chain.