Chain size

.325" · .058" · 64 DL chain: which saws it fits

A .325" pitch, .058" gauge chain with 64 drive links. It is most often found on 15" bars, and fits 107 chainsaw and pole-saw models from 5 brands in Oregon's fitment data. Bar length alone doesn't decide fit — all three numbers have to match your saw.

Pitch.325"

Gauge.058"

Drive links64

Typical bar15"

Oregon chains in this size: 21LPX064G, 21LPX064X2

Popular saws that take this chain

Husqvarna 44015" bar Husqvarna 44515" bar Husqvarna 45015" bar Husqvarna 460 RANCHER15" bar

Confirm it's your size

Read the bar stamp. Near the tail of the guide bar you'll usually find pitch, gauge and drive links, e.g. .325 .058 64. Some bars stamp the Oregon bar number instead — look it up on oregonproducts.com.
Count the drive links on your old chain — the teeth that ride inside the bar groove, not the cutters. It must be exactly 64.
If the stamp is worn off, the owner's manual lists the bar and chain; find it on the manufacturer's support site.

Easy to mix up with

.325" · .058" · 56 DL — same pitch and gauge, shorter loop (usually 13" bars)
.325" · .058" · 66 DL — same pitch and gauge, longer loop (usually 16" bars)

All 107 models, by brand

Husqvarna 83 models

440 15"
445 15"
450 15"
460 RANCHER 15"
33 15"
38 15"
40 15"
42 15"
44 15"
45 15"
49 15"
50 15"
51 15"
55 15"
55 RANCHER 15"
57 15"
133 15"
140 15"
140S 15"
154 15"
234 15"
238 15"
240 15"
242 15"
242XP 15"
246 15"
254 15"
254XP 15"
257 15"
261 15"
262 15"
262XP 15"
336 15"
338XPT 15"
339XP 15"
340 15"
340E 15"
340SE 15"
340SG 15"
345 15"
346 15"
346XP 15"
346XP E-TECH 15"
346XPG 15"
350 15"
351 15"
353 15"
353E-TECH 15"
353G E-TECH 15"
355 15"
357 15"
357XP 15"
357XPG 15"
359 15"
359E-TECH 15"
360 15"
362 15"
362 XP 15"
435 15"
435e 15"
440e 15"
444 15"
445e 15"
450 50th Anniversary 15"
450e 15"
455 15"
455 RANCHER 15"
455e RANCHER 15"
460 15"
466 15"
543XP 15"
543XPG 15"
545 15"
545 MARK II 15"
550XP 15"
550XP MARK II 15"
550XPG 15"
550XPG MARK II 15"
555 15"
560XP 15"
560XPG 15"
1400 15"
1600 15"

Makita 14 models

ECHO 6 models

CS-450 15"
CS-450P 15"
CS-490 15"
CS-500P 15"
CS-530 15"
CS-550P 15"

Craftsman 3 models

Poulan 1 models

325 15"

Source: Oregon part-finder fitment data, retrieved 2026-07-06. We list a model here when Oregon recommends a .325" · .058" · 64 DL chain for one of its bar lengths; we haven't fitted each saw ourselves. Some bar configurations in the source don't give a drive-link count and aren't included — if your saw isn't listed, count your chain.