Chain size

.325" · .058" · 56 DL chain: which saws it fits

A .325" pitch, .058" gauge chain with 56 drive links. It is most often found on 13" bars, and fits 100 chainsaw and pole-saw models from 3 brands in Oregon's fitment data. Bar length alone doesn't decide fit — all three numbers have to match your saw.

Pitch.325"

Gauge.058"

Drive links56

Typical bar13"

Oregon chains in this size: 21LGX056G, 21LPX056G

Popular saws that take this chain

Husqvarna 44013" bar Husqvarna 44513" bar Husqvarna 45013" bar Husqvarna 460 RANCHER13" bar

Confirm it's your size

Read the bar stamp. Near the tail of the guide bar you'll usually find pitch, gauge and drive links, e.g. .325 .058 56. Some bars stamp the Oregon bar number instead — look it up on oregonproducts.com.
Count the drive links on your old chain — the teeth that ride inside the bar groove, not the cutters. It must be exactly 56.
If the stamp is worn off, the owner's manual lists the bar and chain; find it on the manufacturer's support site.

Easy to mix up with

.325" · .058" · 64 DL — same pitch and gauge, longer loop (usually 15" bars)

All 100 models, by brand

Husqvarna 83 models

440 13"
445 13"
450 13"
460 RANCHER 13"
33 13"
38 13"
40 13"
42 13"
44 13"
45 13"
49 13"
50 13"
51 13"
55 13"
55 RANCHER 13"
57 13"
133 13"
140 13"
140S 13"
154 13"
234 13"
238 13"
240 13"
242 13"
242XP 13"
246 13"
254 13"
254XP 13"
257 13"
261 13"
262 13"
262XP 13"
336 13"
338XPT 13"
339XP 13"
340 13"
340E 13"
340SE 13"
340SG 13"
345 13"
346 13"
346XP 13"
346XP E-TECH 13"
346XPG 13"
350 13"
351 13"
353 13"
353E-TECH 13"
353G E-TECH 13"
355 13"
357 13"
357XP 13"
357XPG 13"
359 13"
359E-TECH 13"
360 13"
362 13"
362 XP 13"
435 13"
435e 13"
440e 13"
444 13"
445e 13"
450 50th Anniversary 13"
450e 13"
455 13"
455 RANCHER 13"
455e RANCHER 13"
460 13"
466 13"
543XP 13"
543XPG 13"
545 13"
545 MARK II 13"
550XP 13"
550XP MARK II 13"
550XPG 13"
550XPG MARK II 13"
555 13"
560XP 13"
560XPG 13"
1400 13"
1600 13"

Makita 14 models

Craftsman 3 models

Source: Oregon part-finder fitment data, retrieved 2026-07-06. We list a model here when Oregon recommends a .325" · .058" · 56 DL chain for one of its bar lengths; we haven't fitted each saw ourselves. Some bar configurations in the source don't give a drive-link count and aren't included — if your saw isn't listed, count your chain.