Morocca

Chain size

3/8" LP · .043" · 56 DL chain: which saws it fits

A 3/8" Low Profile pitch, .043" gauge chain with 56 drive links. It is most often found on 16" bars, and fits 357 chainsaw and pole-saw models from 8 brands in Oregon's fitment data. Bar length alone doesn't decide fit — all three numbers have to match your saw.

Pitch3/8" Low Profile
Gauge.043"
Drive links56
Typical bar16"

Oregon chains in this size: 90PX056G

Popular saws that take this chain

DeWalt DCCS690B16" barECHO CS-31016" barECHO CS-355T16" barECHO CS-40016" barEGO CS160016" barEGO CS160416" bar

MOROCCA chains in this size

16" Chainsaw Chain R56
Saw Chains
16" Chainsaw Chain R56
$23
16" Chainsaw Saw Chain
Saw Chains
16" Chainsaw Saw Chain
$20
2PC 16" CHAINSAW CHAIN BLADE
Saw Chains
2PC 16" CHAINSAW CHAIN BLADE
$23

Confirm it's your size

  1. Read the bar stamp. Near the tail of the guide bar you'll usually find pitch, gauge and drive links, e.g. 3/8 LP .043 56. Some bars stamp the Oregon bar number instead — look it up on oregonproducts.com.
  2. Count the drive links on your old chain — the teeth that ride inside the bar groove, not the cutters. It must be exactly 56.
  3. Low profile is not full profile. 3/8" LP and 3/8" full-profile chains share the "3/8" but are not interchangeable.
  4. If the stamp is worn off, the owner's manual lists the bar and chain; find it on the manufacturer's support site.

Easy to mix up with

All 357 models, by brand

Craftsman 139 models
Poulan 98 models
Makita 48 models
ECHO 40 models
Husqvarna 18 models
DeWalt 9 models
EGO 4 models
Atlas 1 models

Source: Oregon part-finder fitment data, retrieved 2026-07-06. We list a model here when Oregon recommends a 3/8" LP · .043" · 56 DL chain for one of its bar lengths; we haven't fitted each saw ourselves. Some bar configurations in the source don't give a drive-link count and aren't included — if your saw isn't listed, count your chain.