§ Fitment Guide
Stihl MS 230 C-BE chain size & replacement chart
The Stihl MS 230 C-BE takes a 3/8" Low Profile™ pitch, .050" gauge chain. Below: every factory bar length with its exact drive-link count, cross-referenced to Oregon part numbers, plus the OEM parts list.
Fitment matrix
| Bar length | Pitch | Gauge | Drive links | Oregon chains | Bars / combos |
|---|---|---|---|---|---|
| 12" | 3/8" Low Profile™ | .050" | 44 | 91PX044G91VXL044X291VXL044G | 120SXEA074120SDEA074 |
| 14" | 3/8" Low Profile™ | .050" | 50 | 91PX050G91VXL050X291VXL050G | 140SXEA074140SDEA074 |
| 16" | 3/8" Low Profile™ or .325" | .050" / .063" | 55, 62 | 91PX055G91PXL055G91VXL055X291VXL055G20LGX062G20LPX062X220LPX062G22LGX062G22LPX062GL62 | 160SXEA074160SDEA074160PXLBA074163PXBA074163PXLBA074557502 |
| 18" | 3/8" Low Profile™ or .325" | .050" / .063" | 68 | 20LGX068G20LPX068G22BPX068G22LGX068G22LPX068GL68V68X3V68 | 180TXLBA074183PXBA074183PXLBA074578767578780 |
Source: Oregon part-finder, retrieved 2026-07-06. Part numbers link to the manufacturer's spec page. Always confirm drive-link count against your current chain before ordering.
Compatible chains in our shop
How to confirm the fit
- Read your bar. The pitch and gauge are stamped on the guide bar near the saw body — e.g.
3/8" LP .050". - Count drive links. Lay the old chain flat and count the teeth that ride inside the bar groove. This number must match exactly; length in inches is not enough.
- Match all three. Pitch, gauge and drive-link count all have to agree with a row in the table above. Two of three is not a fit.
Watch: how to identify chain pitch and gauge
Oregon Products: Identifying Chain Pitch and Chain Gauge Official video from Oregon Products, the manufacturer behind the cross-reference part numbers above.
Official Stihl resources
- STIHL owner's manuals — owner's manual for the MS 230 C-BE, including tensioning and maintenance intervals.
FAQ
What size chain does a Stihl MS 230 C-BE take?
The Stihl MS 230 C-BE runs a 3/8" Low Profile™ pitch, .050" gauge chain. Available bar lengths: 12", 14", 16", 18". Match the drive-link count to your bar (see the table above).
How do I know which gauge my MS 230 C-BE chain is?
Check the number stamped on your guide bar near the tail, or measure the drive-link thickness with calipers. Common gauges for the MS 230 C-BE are .050", .050" / .063".
Can I put a longer bar on my Stihl MS 230 C-BE?
Oregon lists 12", 14", 16", 18" bars for the MS 230 C-BE. Stay within this range — a longer bar than the engine is rated for cuts slowly and accelerates wear.