Chain size
.325" · .063" · 62 DL chain: which saws it fits
A .325" pitch, .063" gauge chain with 62 drive links. It is most often found on 16" bars, and fits 14 chainsaw and pole-saw models from 1 brands in Oregon's fitment data. Bar length alone doesn't decide fit — all three numbers have to match your saw.
Pitch.325"
Gauge.063"
Drive links62
Typical bar16"
Popular saws that take this chain
Confirm it's your size
- Read the bar stamp. Near the tail of the guide bar you'll usually find pitch, gauge and drive links, e.g.
.325 .063 62. Some bars stamp the Oregon bar number instead — look it up on oregonproducts.com. - Count the drive links on your old chain — the teeth that ride inside the bar groove, not the cutters. It must be exactly 62.
- If the stamp is worn off, the owner's manual lists the bar and chain; find it on the manufacturer's support site.
Easy to mix up with
- .325" · .063" · 67 DL — same pitch and gauge, longer loop (usually 16" bars)
- .325" · .050" · 62 DL — same pitch and length, thinner drive links; it won't sit right in a .063" groove
All 14 models, by brand
STIHL 14 models
- MS 250 16"
- 021 16"
- 025 16"
- 025C 16"
- 70 16"
- MS 230 16"
- MS 230 C 16"
- MS 230 C-BE 16"
- MS 241 C-M 16"
- MS 250 C 16"
- MS 250 C-BE 16"
- MS 251 16"
- MS 251 C 16"
- MS 251 C-BE 16"
Source: Oregon part-finder fitment data, retrieved 2026-07-06. We list a model here when Oregon recommends a .325" · .063" · 62 DL chain for one of its bar lengths; we haven't fitted each saw ourselves. Some bar configurations in the source don't give a drive-link count and aren't included — if your saw isn't listed, count your chain.