Morocca

Chain size

3/8" LP · .050" · 44 DL chain: which saws it fits

A 3/8" Low Profile pitch, .050" gauge chain with 44 drive links. It is most often found on 12" bars, and fits 126 chainsaw and pole-saw models from 4 brands in Oregon's fitment data. Bar length alone doesn't decide fit — all three numbers have to match your saw.

Pitch3/8" Low Profile
Gauge.050"
Drive links44
Typical bar12"

Oregon chains in this size: 91PX044G, 91VXL044G, 91VXL044X2

Popular saws that take this chain

STIHL MS 17012" barSTIHL MS 25012" bar

Confirm it's your size

  1. Read the bar stamp. Near the tail of the guide bar you'll usually find pitch, gauge and drive links, e.g. 3/8 LP .050 44. Some bars stamp the Oregon bar number instead — look it up on oregonproducts.com.
  2. Count the drive links on your old chain — the teeth that ride inside the bar groove, not the cutters. It must be exactly 44.
  3. Low profile is not full profile. 3/8" LP and 3/8" full-profile chains share the "3/8" but are not interchangeable.
  4. If the stamp is worn off, the owner's manual lists the bar and chain; find it on the manufacturer's support site.

Easy to mix up with

All 126 models, by brand

STIHL 92 models
ECHO 31 models
Poulan 2 models
Husqvarna 1 models

Source: Oregon part-finder fitment data, retrieved 2026-07-06. We list a model here when Oregon recommends a 3/8" LP · .050" · 44 DL chain for one of its bar lengths; we haven't fitted each saw ourselves. Some bar configurations in the source don't give a drive-link count and aren't included — if your saw isn't listed, count your chain.