§ Fitment Guide
Echo PPT-2620 chain size & replacement chart
The Echo PPT-2620 takes a 3/8" Low Profile™ pitch, .043" / .050" gauge chain. Below: every factory bar length with its exact drive-link count, cross-referenced to Oregon part numbers, plus the OEM parts list.
Fitment matrix
| Bar length | Pitch | Gauge | Drive links | Oregon chains | Bars / combos |
|---|---|---|---|---|---|
| 10" | 3/8" Low Profile™ | .043" / .050" | 40, 39 | 90PX040G90PX039GR4091PX040G91VXL039GS39S40X3S40-21S40 | 100SDEA041 |
| 12" | 3/8" Low Profile™ | .043" / .050" | 44, 45 | 90PX044X290PX044G90PX045GR44R45-21R4591PX044G91PX045G91VXL044X291VXL045X291VXL044G91VXL045GS44S45 | 124MLEA041120SXEA041120DGEA041120SDEA04110569827792 |
| 14" | 3/8" Low Profile™ | .043" / .050" | 52, 49 | 90PX052GR5291PX052G91VXL052X291VXL052GS49S52X3S52S52TT52X3T52 | 1056992785627856PDQ27859 |
Source: Oregon part-finder, retrieved 2026-07-06. Part numbers link to the manufacturer's spec page. Always confirm drive-link count against your current chain before ordering.
How to confirm the fit
- Read your bar. The pitch and gauge are stamped on the guide bar near the saw body — e.g.
3/8" LP .050". - Count drive links. Lay the old chain flat and count the teeth that ride inside the bar groove. This number must match exactly; length in inches is not enough.
- Match all three. Pitch, gauge and drive-link count all have to agree with a row in the table above. Two of three is not a fit.
Watch: how to identify chain pitch and gauge
Oregon Products: Identifying Chain Pitch and Chain Gauge Official video from Oregon Products, the manufacturer behind the cross-reference part numbers above.
Official Echo resources
- ECHO product manuals — owner's manual for the PPT-2620, including tensioning and maintenance intervals.
- ECHO parts catalog lookup — exploded parts diagrams and OEM part numbers.
FAQ
What size chain does a Echo PPT-2620 take?
The Echo PPT-2620 runs a 3/8" Low Profile™ pitch, .043" / .050" gauge chain. Available bar lengths: 10", 12", 14". Match the drive-link count to your bar (see the table above).
How do I know which gauge my PPT-2620 chain is?
Check the number stamped on your guide bar near the tail, or measure the drive-link thickness with calipers. Common gauges for the PPT-2620 are .043" / .050".
Can I put a longer bar on my Echo PPT-2620?
Oregon lists 10", 12", 14" bars for the PPT-2620. Stay within this range — a longer bar than the engine is rated for cuts slowly and accelerates wear.