Chain size

.325" · .063" · 67 DL chain: which saws it fits

A .325" pitch, .063" gauge chain with 67 drive links. It is most often found on 16" bars, and fits 45 chainsaw and pole-saw models from 1 brands in Oregon's fitment data. Bar length alone doesn't decide fit — all three numbers have to match your saw.

Pitch.325"

Gauge.063"

Drive links67

Typical bar16"

Oregon chains in this size: 22BPX067G, 22LGX067G, 22LPX067G, 22LPX067X2

Popular saws that take this chain

STIHL MS 27116" bar STIHL MS 29116" bar

Confirm it's your size

Read the bar stamp. Near the tail of the guide bar you'll usually find pitch, gauge and drive links, e.g. .325 .063 67. Some bars stamp the Oregon bar number instead — look it up on oregonproducts.com.
Count the drive links on your old chain — the teeth that ride inside the bar groove, not the cutters. It must be exactly 67.
If the stamp is worn off, the owner's manual lists the bar and chain; find it on the manufacturer's support site.

Easy to mix up with

.325" · .063" · 62 DL — same pitch and gauge, shorter loop (usually 16" bars)
.325" · .063" · 68 DL — same pitch and gauge, longer loop (usually 18" bars)
.325" · .050" · 67 DL — same pitch and length, thinner drive links; it won't sit right in a .063" groove

All 45 models, by brand

STIHL 45 models

MS 271 16"
MS 291 16"
024 16"
024 Super 16"
026 16"
026 PRO 16"
026P 16"
028 16"
028 Super 16"
029 16"
030 16"
031 16"
032 16"
034 16"
034 SUPER 16"
036 16"
036 PRO 16"
036 QS 16"
039 16"
040 16"
MS 260 16"
MS 260 Pro 16"
MS 261 16"
MS 261 C-M 16"
MS 261 C-MQ 16"
MS 261 CQ 16"
MS 270 16"
MS 270 C 16"
MS 270 C-B 16"
MS 270 CQS 16"
MS 280 16"
MS 280 C-BQ 16"
MS 280 CQS 16"
MS 290 16"
MS 291 C-BEQ 16"
MS 310 16"
MS 341 16"
MS 360 16"
MS 360 C 16"
MS 360 Pro 16"
MS 360 QS 16"
MS 361 16"
MS 361 C-B 16"
MS 361 QS 16"
MS 390 16"

Source: Oregon part-finder fitment data, retrieved 2026-07-06. We list a model here when Oregon recommends a .325" · .063" · 67 DL chain for one of its bar lengths; we haven't fitted each saw ourselves. Some bar configurations in the source don't give a drive-link count and aren't included — if your saw isn't listed, count your chain.