§ Fitment Guide
Stihl 41 chain size & replacement chart
The Stihl 41 takes a 3/8" pitch, .050" gauge chain. Below: every factory bar length with its exact drive-link count, cross-referenced to Oregon part numbers, plus the OEM parts list.
Fitment matrix
| Bar length | Pitch | Gauge | Drive links | Oregon chains | Bars / combos |
|---|---|---|---|---|---|
| 16" | 3/8" | .050" | — | 72TXL060G | — |
| 18" | 3/8" | .050" | — | 72TXL066G | — |
| 20" | 3/8" | .050" / .063" | — | 72TXL072G72TXL072X275TXL072G | — |
| 24" | 3/8" | .050" | — | 72TXL084G72TXL084X2 | — |
| 28" | 3/8" | .050" | — | 72TXL091G | — |
Source: Oregon part-finder, retrieved 2026-07-06. Part numbers link to the manufacturer's spec page. Always confirm drive-link count against your current chain before ordering.
Compatible chains in our shop
How to confirm the fit
- Read your bar. The pitch and gauge are stamped on the guide bar near the saw body — e.g.
3/8" LP .050". - Count drive links. Lay the old chain flat and count the teeth that ride inside the bar groove. This number must match exactly; length in inches is not enough.
- Match all three. Pitch, gauge and drive-link count all have to agree with a row in the table above. Two of three is not a fit.
Watch: how to identify chain pitch and gauge
Oregon Products: Identifying Chain Pitch and Chain Gauge Official video from Oregon Products, the manufacturer behind the cross-reference part numbers above.
Official Stihl resources
- STIHL owner's manuals — owner's manual for the 41, including tensioning and maintenance intervals.
FAQ
What size chain does a Stihl 41 take?
The Stihl 41 runs a 3/8" pitch, .050" gauge chain. Available bar lengths: 16", 18", 20", 24", 28". Match the drive-link count to your bar (see the table above).
How do I know which gauge my 41 chain is?
Check the number stamped on your guide bar near the tail, or measure the drive-link thickness with calipers. Common gauges for the 41 are .050", .050" / .063".
Can I put a longer bar on my Stihl 41?
Oregon lists 16", 18", 20", 24", 28" bars for the 41. Stay within this range — a longer bar than the engine is rated for cuts slowly and accelerates wear.