§ Fitment Guide
Echo CS-701 chain size & replacement chart
The Echo CS-701 takes a 3/8" pitch, .050" gauge chain. Below: every factory bar length with its exact drive-link count, cross-referenced to Oregon part numbers, plus the OEM parts list.
Fitment matrix
| Bar length | Pitch | Gauge | Drive links | Oregon chains | Bars / combos |
|---|---|---|---|---|---|
| 16" | 3/8" | .050" | 60 | 72EXL060X2D60E6072TXL060G72EXL060G72LPX060G | 160RNDD17627851 |
| 18" | .325" or 3/8" | .050" / .058" | 66 | 72EXL066X2D66E6672TXL064G72TXL066G72EXL064G72EXL066G72LPX064G72LPX066G | 180RNDD17630159 |
| 20" | 3/8" | .050" | 70 | B70D70TD70-21D70E7072TXL070G72EXL070G72LPX070G | 200ATMD176200RNDD17627850 |
| 23" | 3/8" | .050" | — | 72LPX081G | — |
| 24" | 3/8" | .050" | 81 | 72EXL084X2D8172TXL081G72TXL084G72TXL084X272CJ084G72EXJ084G72EXL081G72EXL084G72LPX081G72LPX084G72LPX084X272DPX084G | 240ATMD176240RNDD176 |
| 27" | 3/8" | .050" | 93 | 72LPX093G72EXL093G | — |
| 28" | 3/8" | .050" | 93 | 72LPX093G72TXL093G72CJ093G72EXJ093G72EXL093G | — |
| 32" | 3/8" | .050" | — | 72TXL105G72CJ105G72EXJ105G72EXL105G72LPX105G | — |
Source: Oregon part-finder, retrieved 2026-07-06. Part numbers link to the manufacturer's spec page. Always confirm drive-link count against your current chain before ordering.
Compatible chains in our shop
How to confirm the fit
- Read your bar. The pitch and gauge are stamped on the guide bar near the saw body — e.g.
3/8" LP .050". - Count drive links. Lay the old chain flat and count the teeth that ride inside the bar groove. This number must match exactly; length in inches is not enough.
- Match all three. Pitch, gauge and drive-link count all have to agree with a row in the table above. Two of three is not a fit.
Watch: how to identify chain pitch and gauge
Oregon Products: Identifying Chain Pitch and Chain Gauge Official video from Oregon Products, the manufacturer behind the cross-reference part numbers above.
Official Echo resources
- ECHO product manuals — owner's manual for the CS-701, including tensioning and maintenance intervals.
- ECHO parts catalog lookup — exploded parts diagrams and OEM part numbers.
FAQ
What size chain does a Echo CS-701 take?
The Echo CS-701 runs a 3/8" pitch, .050" gauge chain. Available bar lengths: 16", 18", 20", 23", 24", 27", 28", 32". Match the drive-link count to your bar (see the table above).
How do I know which gauge my CS-701 chain is?
Check the number stamped on your guide bar near the tail, or measure the drive-link thickness with calipers. Common gauges for the CS-701 are .050", .050" / .058".
Can I put a longer bar on my Echo CS-701?
Oregon lists 16", 18", 20", 23", 24", 27", 28", 32" bars for the CS-701. Stay within this range — a longer bar than the engine is rated for cuts slowly and accelerates wear.