Chain size
.325" · .050" · 80 DL chain: which saws it fits
A .325" pitch, .050" gauge chain with 80 drive links. It is most often found on 20" bars, and fits 13 chainsaw and pole-saw models from 2 brands in Oregon's fitment data. Bar length alone doesn't decide fit — all three numbers have to match your saw.
Pitch.325"
Gauge.050"
Drive links80
Typical bar20"
Oregon chains in this size: 95TXL080G
Popular saws that take this chain
Confirm it's your size
- Read the bar stamp. Near the tail of the guide bar you'll usually find pitch, gauge and drive links, e.g.
.325 .050 80. Some bars stamp the Oregon bar number instead — look it up on oregonproducts.com. - Count the drive links on your old chain — the teeth that ride inside the bar groove, not the cutters. It must be exactly 80.
- If the stamp is worn off, the owner's manual lists the bar and chain; find it on the manufacturer's support site.
Easy to mix up with
- .325" · .050" · 78 DL — same pitch and gauge, shorter loop (usually 20" bars)
- .325" · .050" · 81 DL — same pitch and gauge, longer loop (usually 20" bars)
All 13 models, by brand
Husqvarna 12 models
- 440 20"
- 445 20"
- 450 20"
- 460 RANCHER 20"
- 440e 20"
- 445e 20"
- 450 50th Anniversary 20"
- 450e 20"
- 455 20"
- 455 RANCHER 20"
- 455e RANCHER 20"
- 460 20"
Craftsman 1 models
- 358.38200 20"
Source: Oregon part-finder fitment data, retrieved 2026-07-06. We list a model here when Oregon recommends a .325" · .050" · 80 DL chain for one of its bar lengths; we haven't fitted each saw ourselves. Some bar configurations in the source don't give a drive-link count and aren't included — if your saw isn't listed, count your chain.