Overview
This aftermarket replacement chain is designed to fit select Harbor Freight pole saw models. It serves as a drop-in replacement when the original chain becomes dull past the point of resharpening, develops a damaged cutter, or has stretched beyond the tensioner’s adjustment range. Having a spare on the shelf eliminates trips to the dealer mid-project.
Key specifications
- Type: Semi-chisel (aftermarket replacement)
Compatibility
This chain is designed as a direct replacement for select Harbor Freight pole saws. Double-check the pitch, gauge, and drive-link count on your existing bar stamp before purchasing. These three measurements must all match for safe operation.
Installation notes
Safety first: pull the battery or unplug the unit. Open the bar cover by loosening the retaining knob or nuts. Slide the old chain off the bar groove and sprocket. Lay the new chain into the bar groove with cutters pointing forward along the top rail, loop it around the sprocket, and replace the cover. Adjust tension so the chain sits snug against the bar with just enough slack to pull it away slightly by hand.
Common questions
Q: Will this Morocca 2PC Replacement Chain fit my Harbor Freight Portland pole saw model 62896, and does it also work on 63190 and 68862?
Yes, this chain is made for the Harbor Freight/Portland pole saw models 62896, 63190, and 68862, and it is also commonly listed for Chicago electric-compatible units in that same family. It’s still a good idea to confirm your original bar and chain setup matches your saw before installation, especially if the bar has ever been replaced.
Q: I have a Chicago Electric pole saw that looks like the Portland 63190—how can I tell if this replacement chain is the right one?
The safest way is to compare the chain currently on your saw to the replacement and verify it matches the bar length and drive link setup used on the Harbor Freight Portland 62896/63190/68862 style pole saws. If your Chicago Electric unit shares the same bar and chain configuration as those models, this chain should install and tension normally.
Q: What’s the correct way to install and maintain this Morocca 2PC replacement chain on my Portland 68862 pole saw?
When installing, make sure the cutting teeth face the correct direction on the top side of the bar, then set chain tension so it sits snugly but still pulls around by hand with light resistance. Keep the chain properly oiled, check tension after the first few cuts, and touch up the cutters regularly since a sharp, well-lubricated chain reduces strain on the pole saw motor.
