§ Fitment Guide
Makita DCS6400 chain size & replacement chart
The Makita DCS6400 takes a 3/8" pitch, .058" gauge chain. Below: every factory bar length with its exact drive-link count, cross-referenced to Oregon part numbers, plus the OEM parts list.
Fitment matrix
| Bar length | Pitch | Gauge | Drive links | Oregon chains | Bars / combos |
|---|---|---|---|---|---|
| 15" | 3/8" | .058" | — | — | 158VXLHD009 |
| 16" | 3/8" | .050" / .058" | 60 | 72EXL060X2B60D60E6072TXL060G72EXL060G72LPX060GP6073TXL060G73EXL060G73LPX060G | 160RNDD009168SFHD009168ATMD009168RNDD009168VXLHD009 |
| 17" | 3/8" | .058" | — | — | 178RNDD009178VXLHD009 |
| 18" | 3/8" | .058" | — | 73TXL068G | 188SFHD009188ATMD009188RNDD009188VXLHD009 |
| 20" | 3/8" | .058" | — | 73TXL072G | 208SFHD009208ATMD009208RNDD009208VXLHD009 |
| 24" | 3/8" | .058" | — | 73TXL084G | 248SFHD009248ATMD009248RNDD009 |
| 28" | 3/8" | .058" | — | — | 288ATMD009288RNDD009 |
Source: Oregon part-finder, retrieved 2026-07-06. Part numbers link to the manufacturer's spec page. Always confirm drive-link count against your current chain before ordering.
Compatible chains in our shop
How to confirm the fit
- Read your bar. The pitch and gauge are stamped on the guide bar near the saw body — e.g.
3/8" LP .050". - Count drive links. Lay the old chain flat and count the teeth that ride inside the bar groove. This number must match exactly; length in inches is not enough.
- Match all three. Pitch, gauge and drive-link count all have to agree with a row in the table above. Two of three is not a fit.
Watch: how to identify chain pitch and gauge
Oregon Products: Identifying Chain Pitch and Chain Gauge Official video from Oregon Products, the manufacturer behind the cross-reference part numbers above.
Official Makita resources
- Makita manuals & parts breakdowns — owner's manual for the DCS6400, including tensioning and maintenance intervals.
- Makita parts breakdowns — exploded parts diagrams and OEM part numbers.
FAQ
What size chain does a Makita DCS6400 take?
The Makita DCS6400 runs a 3/8" pitch, .058" gauge chain. Available bar lengths: 15", 16", 17", 18", 20", 24", 28". Match the drive-link count to your bar (see the table above).
How do I know which gauge my DCS6400 chain is?
Check the number stamped on your guide bar near the tail, or measure the drive-link thickness with calipers. Common gauges for the DCS6400 are .058", .050" / .058".
Can I put a longer bar on my Makita DCS6400?
Oregon lists 15", 16", 17", 18", 20", 24", 28" bars for the DCS6400. Stay within this range — a longer bar than the engine is rated for cuts slowly and accelerates wear.