§ Fitment Guide
Makita DCS4300 chain size & replacement chart
The Makita DCS4300 takes a 3/8" Low Profile™ pitch, .050" gauge chain. Below: every factory bar length with its exact drive-link count, cross-referenced to Oregon part numbers, plus the OEM parts list.
Fitment matrix
| Bar length | Pitch | Gauge | Drive links | Oregon chains | Bars / combos |
|---|---|---|---|---|---|
| 12" | 3/8" Low Profile™ | .050" | 45 | S45 | — |
| 13" | .325" | .050" / .058" | — | — | 130MLBK041130MLBK095138RNBK095138SLBK095 |
| 14" | 3/8" Low Profile™ | .050" | 52 | 91PX052G91VXL052X291VXL052GS52X3S52S52T | 140SXEA041140SDEA041140DGEA041140SDET041105699 |
| 15" | .325" | .050" / .058" | — | — | 150MLBK041150MLBK095158PXLBK041158SLGK095158RNBK095158VXLGK041 |
| 16" | 3/8" Low Profile™ or .325" | .050" / .058" | 56, 66 | S56X391PX056G91VXL056X291VXL056GS56-21S56S56TM66 | 160SXEA041160SPEA041160SDEA041160DGEA041160SDET041160MLBK095168RNBK095168VXLGK041105700 |
| 18" | .325" or 3/8" | .050" / .058" | 72 | 95TXL072GM72X3M7272TXL068G72LPX068G | 180MLBK041180MLBK095188RNBK095188SLGK095188VXLGK041 |
| 20" | .325" | .058" | — | — | 208RNBK095 |
Source: Oregon part-finder, retrieved 2026-07-06. Part numbers link to the manufacturer's spec page. Always confirm drive-link count against your current chain before ordering.
Compatible chains in our shop
How to confirm the fit
- Read your bar. The pitch and gauge are stamped on the guide bar near the saw body — e.g.
3/8" LP .050". - Count drive links. Lay the old chain flat and count the teeth that ride inside the bar groove. This number must match exactly; length in inches is not enough.
- Match all three. Pitch, gauge and drive-link count all have to agree with a row in the table above. Two of three is not a fit.
Watch: how to identify chain pitch and gauge
Oregon Products: Identifying Chain Pitch and Chain Gauge Official video from Oregon Products, the manufacturer behind the cross-reference part numbers above.
Official Makita resources
- Makita manuals & parts breakdowns — owner's manual for the DCS4300, including tensioning and maintenance intervals.
- Makita parts breakdowns — exploded parts diagrams and OEM part numbers.
FAQ
What size chain does a Makita DCS4300 take?
The Makita DCS4300 runs a 3/8" Low Profile™ pitch, .050" gauge chain. Available bar lengths: 12", 13", 14", 15", 16", 18", 20". Match the drive-link count to your bar (see the table above).
How do I know which gauge my DCS4300 chain is?
Check the number stamped on your guide bar near the tail, or measure the drive-link thickness with calipers. Common gauges for the DCS4300 are .050", .050" / .058", .058".
Can I put a longer bar on my Makita DCS4300?
Oregon lists 12", 13", 14", 15", 16", 18", 20" bars for the DCS4300. Stay within this range — a longer bar than the engine is rated for cuts slowly and accelerates wear.