§ Fitment Guide
Husqvarna EL16 chain size & replacement chart
The Husqvarna EL16 takes a 3/8" Low Profile™ pitch, .043" / .050" gauge chain. Below: every factory bar length with its exact drive-link count, cross-referenced to Oregon part numbers, plus the OEM parts list.
Fitment matrix
| Bar length | Pitch | Gauge | Drive links | Oregon chains | Bars / combos |
|---|---|---|---|---|---|
| 12" | 3/8" Low Profile™ | .043" / .050" | — | — | 124MLEA041120SDEA041 |
| 13" | .325" | .058" | — | — | 138PXLBK095138RNBK095138SLBK095 |
| 14" | 3/8" Low Profile™ | .043" / .050" | 52 | PS52 | 144MLEA041140SDEA041140SDET041541652 |
| 15" | .325" | .058" | — | — | 158PXBK095158PXLBK095158RNBK095158SLBK095 |
| 16" | 3/8" Low Profile™ or .325" | .043" / .050" / .058" | 56 | PS56 | 164MLEA041160SPEA041160SDEA041160SDET041168PXBK095168PXLBK095168RNBK095541656 |
| 18" | 3/8" Low Profile™ or .325" | .050" / .058" | — | — | 180SDEA041180SDET041188PXBK095188PXLBK095188RNBK095 |
| 20" | .325" | .050" / .058" | — | — | 200TXLBK095208PXBK095208RNBK095208VXLGK095 |
Source: Oregon part-finder, retrieved 2026-07-06. Part numbers link to the manufacturer's spec page. Always confirm drive-link count against your current chain before ordering.
Compatible chains in our shop
How to confirm the fit
- Read your bar. The pitch and gauge are stamped on the guide bar near the saw body — e.g.
3/8" LP .050". - Count drive links. Lay the old chain flat and count the teeth that ride inside the bar groove. This number must match exactly; length in inches is not enough.
- Match all three. Pitch, gauge and drive-link count all have to agree with a row in the table above. Two of three is not a fit.
Watch: how to identify chain pitch and gauge
Oregon Products: Identifying Chain Pitch and Chain Gauge Official video from Oregon Products, the manufacturer behind the cross-reference part numbers above.
Official Husqvarna resources
- Husqvarna manuals & downloads — owner's manual for the EL16, including tensioning and maintenance intervals.
- Husqvarna parts diagrams (IPL) — exploded parts diagrams and OEM part numbers.
FAQ
What size chain does a Husqvarna EL16 take?
The Husqvarna EL16 runs a 3/8" Low Profile™ pitch, .043" / .050" gauge chain. Available bar lengths: 12", 13", 14", 15", 16", 18", 20". Match the drive-link count to your bar (see the table above).
How do I know which gauge my EL16 chain is?
Check the number stamped on your guide bar near the tail, or measure the drive-link thickness with calipers. Common gauges for the EL16 are .043" / .050", .058", .043" / .050" / .058", .050" / .058".
Can I put a longer bar on my Husqvarna EL16?
Oregon lists 12", 13", 14", 15", 16", 18", 20" bars for the EL16. Stay within this range — a longer bar than the engine is rated for cuts slowly and accelerates wear.