§ Fitment Guide
Husqvarna EL 16 chain size & replacement chart
The Husqvarna EL 16 takes a .325" pitch, .050" / .058" gauge chain. Below: every factory bar length with its exact drive-link count, cross-referenced to Oregon part numbers, plus the OEM parts list.
Fitment matrix
| Bar length | Pitch | Gauge | Drive links | Oregon chains | Bars / combos |
|---|---|---|---|---|---|
| 13" | .325" | .050" / .058" | — | — | 130MLBK095130TXLBK095138PXLBK095138RNBK095138SLBK095 |
| 14" | 3/8" Low Profile or 3/8" Low Profile™ | .050" | 52 | S52X3S52S52T | 2785627856PDQ |
| 15" | .325" | .050" / .058" | — | — | 150MLBK095150TXLBK095158PXBK095158PXLBK095158SLGK095158RNBK095158SLBK095158VXLGK095 |
| 16" | 3/8" Low Profile or 3/8" Low Profile™ or .325" or 3/8" | .043" / .050" / .058" | 56 | S56X3S56-21S56S56T | 160MLBK095160TXLBK095168PXBK095168PXLBK095168RNBK095168VXLGK095168ATMK095623000623000PDQ27857PDQ27857 |
| 18" | .325" or 3/8" | .050" / .058" | — | — | 180MLBK095180MPBK095180TXLBK095188PXBK095188SFGK095188PXLBK095188RNBK095188SLGK095188VXLGK095188ATMK095 |
| 20" | .325" or 3/8" | .058" | — | — | 208PXBK095208RNBK095208VXLGK095208ATMK095 |
Source: Oregon part-finder, retrieved 2026-07-06. Part numbers link to the manufacturer's spec page. Always confirm drive-link count against your current chain before ordering.
Compatible chains in our shop
How to confirm the fit
- Read your bar. The pitch and gauge are stamped on the guide bar near the saw body — e.g.
3/8" LP .050". - Count drive links. Lay the old chain flat and count the teeth that ride inside the bar groove. This number must match exactly; length in inches is not enough.
- Match all three. Pitch, gauge and drive-link count all have to agree with a row in the table above. Two of three is not a fit.
Watch: how to identify chain pitch and gauge
Oregon Products: Identifying Chain Pitch and Chain Gauge Official video from Oregon Products, the manufacturer behind the cross-reference part numbers above.
Official Husqvarna resources
- Husqvarna manuals & downloads — owner's manual for the EL 16, including tensioning and maintenance intervals.
- Husqvarna parts diagrams (IPL) — exploded parts diagrams and OEM part numbers.
FAQ
What size chain does a Husqvarna EL 16 take?
The Husqvarna EL 16 runs a .325" pitch, .050" / .058" gauge chain. Available bar lengths: 13", 14", 15", 16", 18", 20". Match the drive-link count to your bar (see the table above).
How do I know which gauge my EL 16 chain is?
Check the number stamped on your guide bar near the tail, or measure the drive-link thickness with calipers. Common gauges for the EL 16 are .050" / .058", .050", .043" / .050" / .058", .058".
Can I put a longer bar on my Husqvarna EL 16?
Oregon lists 13", 14", 15", 16", 18", 20" bars for the EL 16. Stay within this range — a longer bar than the engine is rated for cuts slowly and accelerates wear.