§ Fitment Guide
Husqvarna 572 XPG chain size & replacement chart
The Husqvarna 572 XPG takes a 3/8" pitch, .058" gauge chain. Below: every factory bar length with its exact drive-link count, cross-referenced to Oregon part numbers, plus the OEM parts list.
Fitment matrix
| Bar length | Pitch | Gauge | Drive links | Oregon chains | Bars / combos |
|---|---|---|---|---|---|
| 15" | 3/8" | .058" | — | — | 158VXLHD009 |
| 16" | 3/8" | .058" | — | 73TXL060G | 168SFHD009168ATMD009168RNDD009168VXLHD009 |
| 18" | 3/8" | .058" | — | 73TXL068G | 188SFHD009188ATMD009188RNDD009188VXLHD009 |
| 20" | 3/8" | .058" | — | 73TXL072G | 208SFHD009208ATMD009208RNDD009208VXLHD009 |
| 24" | 3/8" | .058" | — | 73TXL084G | 248SFHD009248ATMD009248RNDD009 |
| 28" | 3/8" | .058" | — | — | 288ATMD009288RNDD009 |
Source: Oregon part-finder, retrieved 2026-07-06. Part numbers link to the manufacturer's spec page. Always confirm drive-link count against your current chain before ordering.
Compatible chains in our shop
How to confirm the fit
- Read your bar. The pitch and gauge are stamped on the guide bar near the saw body — e.g.
3/8" LP .050". - Count drive links. Lay the old chain flat and count the teeth that ride inside the bar groove. This number must match exactly; length in inches is not enough.
- Match all three. Pitch, gauge and drive-link count all have to agree with a row in the table above. Two of three is not a fit.
Watch: how to identify chain pitch and gauge
Oregon Products: Identifying Chain Pitch and Chain Gauge Official video from Oregon Products, the manufacturer behind the cross-reference part numbers above.
Official Husqvarna resources
- Husqvarna manuals & downloads — owner's manual for the 572 XPG, including tensioning and maintenance intervals.
- Husqvarna parts diagrams (IPL) — exploded parts diagrams and OEM part numbers.
FAQ
What size chain does a Husqvarna 572 XPG take?
The Husqvarna 572 XPG runs a 3/8" pitch, .058" gauge chain. Available bar lengths: 15", 16", 18", 20", 24", 28". Match the drive-link count to your bar (see the table above).
How do I know which gauge my 572 XPG chain is?
Check the number stamped on your guide bar near the tail, or measure the drive-link thickness with calipers. Common gauges for the 572 XPG are .058".
Can I put a longer bar on my Husqvarna 572 XPG?
Oregon lists 15", 16", 18", 20", 24", 28" bars for the 572 XPG. Stay within this range — a longer bar than the engine is rated for cuts slowly and accelerates wear.