§ Fitment Guide
Echo CS-360EVL chain size & replacement chart
The Echo CS-360EVL takes a 3/8" Low Profile™ pitch, .043" / .050" gauge chain. Below: every factory bar length with its exact drive-link count, cross-referenced to Oregon part numbers, plus the OEM parts list.
Fitment matrix
| Bar length | Pitch | Gauge | Drive links | Oregon chains | Bars / combos |
|---|---|---|---|---|---|
| 12" | 3/8" Low Profile™ | .043" / .050" | — | — | 124MLEA041120SXEA041120DGEA041120SDEA041 |
| 13" | .325" | .058" | — | — | — |
| 14" | 3/8" Low Profile™ | .043" / .050" | — | — | 144MLEA041140SXEA041140SDEA041140DGEA041 |
| 15" | .325" | .058" | — | — | 158PXLBK041158VXLGK041 |
| 16" | 3/8" Low Profile™ or .325" | .043" / .050" / .058" | — | — | 164MLEA041160SXEA041160SPEA041160SDEA041160DGEA041160MLBK041168VXLGK041 |
| 18" | 3/8" Low Profile™ or .325" | .050" / .058" | — | — | 180SDEA041180SDET041180MLBK041180RNBK041188VXLGK041 |
| 20" | .325" | .058" | — | — | — |
Source: Oregon part-finder, retrieved 2026-07-06. Part numbers link to the manufacturer's spec page. Always confirm drive-link count against your current chain before ordering.
Compatible chains in our shop
How to confirm the fit
- Read your bar. The pitch and gauge are stamped on the guide bar near the saw body — e.g.
3/8" LP .050". - Count drive links. Lay the old chain flat and count the teeth that ride inside the bar groove. This number must match exactly; length in inches is not enough.
- Match all three. Pitch, gauge and drive-link count all have to agree with a row in the table above. Two of three is not a fit.
Watch: how to identify chain pitch and gauge
Oregon Products: Identifying Chain Pitch and Chain Gauge Official video from Oregon Products, the manufacturer behind the cross-reference part numbers above.
Official Echo resources
- ECHO product manuals — owner's manual for the CS-360EVL, including tensioning and maintenance intervals.
- ECHO parts catalog lookup — exploded parts diagrams and OEM part numbers.
FAQ
What size chain does a Echo CS-360EVL take?
The Echo CS-360EVL runs a 3/8" Low Profile™ pitch, .043" / .050" gauge chain. Available bar lengths: 12", 13", 14", 15", 16", 18", 20". Match the drive-link count to your bar (see the table above).
How do I know which gauge my CS-360EVL chain is?
Check the number stamped on your guide bar near the tail, or measure the drive-link thickness with calipers. Common gauges for the CS-360EVL are .043" / .050", .058", .043" / .050" / .058", .050" / .058".
Can I put a longer bar on my Echo CS-360EVL?
Oregon lists 12", 13", 14", 15", 16", 18", 20" bars for the CS-360EVL. Stay within this range — a longer bar than the engine is rated for cuts slowly and accelerates wear.