Chain size
3/8" LP · .043" · 34 DL chain: which saws it fits
A 3/8" Low Profile pitch, .043" gauge chain with 34 drive links. It is most often found on 8" bars, and fits 10 chainsaw and pole-saw models from 4 brands in Oregon's fitment data. Bar length alone doesn't decide fit — all three numbers have to match your saw.
Pitch3/8" Low Profile
Gauge.043"
Drive links34
Typical bar8"
Oregon chains in this size: 90PX034G
Popular saws that take this chain
MOROCCA chains in this size
Confirm it's your size
- Read the bar stamp. Near the tail of the guide bar you'll usually find pitch, gauge and drive links, e.g.
3/8 LP .043 34. Some bars stamp the Oregon bar number instead — look it up on oregonproducts.com. - Count the drive links on your old chain — the teeth that ride inside the bar groove, not the cutters. It must be exactly 34.
- Low profile is not full profile. 3/8" LP and 3/8" full-profile chains share the "3/8" but are not interchangeable.
- If the stamp is worn off, the owner's manual lists the bar and chain; find it on the manufacturer's support site.
Easy to mix up with
- 3/8" LP · .043" · 33 DL — same pitch and gauge, shorter loop (usually 8" bars)
- 3/8" LP · .043" · 39 DL — same pitch and gauge, longer loop (usually 10" bars)
All 10 models, by brand
Craftsman 3 models
- 79246 Pole Saw 8"
- CMCCSP20 8"
- CMCCSP20M1 8"
Black+Decker 1 models
- NPP2018 8"
Source: Oregon part-finder fitment data, retrieved 2026-07-06. We list a model here when Oregon recommends a 3/8" LP · .043" · 34 DL chain for one of its bar lengths; we haven't fitted each saw ourselves. Some bar configurations in the source don't give a drive-link count and aren't included — if your saw isn't listed, count your chain.